China F6 M6 Bag Filters - High-Quality Solutions from Leading Suppliers and Factory
The filter material is made of high-performance non-woven fabric by the thermal melting process, to avoid the discomfort caused to the human body by old-fashioned glass fiber materials. The filter material contains electrostatic fiber, which has an excellent filtering effect on sub-micron dust.
- Extra long service life
- High burst resistance
- Large surface area
- Fits all commonly used filter frames
- High efficiencies at low pressure drops
- Uniform identification is used for appearance color, which is easy to identify.
The pocket filter is suitable for intermediate filtration in an air conditioning system. It is located in front of the HEPA filter.
It is mainly used to filter 1-5 megabytes of dust particles to protect the lower filters in the system and the system itself. It has the advantages of small resistance and a large volume of air. Optional style has bag type, frame type, and combination type.
| Bag (pcs) | Size (mm) | Rated Airflow (m³/h) | Filter Object (μm) | Initial Resistance(Pa) | ||||
|---|---|---|---|---|---|---|---|---|
| M5 | M6 | F7 | F8 | F9 | ||||
| 8 | 592×592×600 | 2200/3400 | ≥0.4 | <35/45 | <45/65 | <55/80 | <65/100 | <65/110 |
| 6 | 592×592×600 | 2200/3400 | ≥0.4 | <40/50 | <55/75 | <60/85 | <65/110 | <70/120 |
| 5 | 492×592×600 | 2000/3000 | ≥0.4 | |||||
| 4 | 287×592×600 | 1100/1700 | ≥0.4 | |||||
| Filter Type | Pocket Filter |
|---|---|
| Filter Class (EN 779) | M5 |
| Filter Media & Separator | Non-woven Fabric |
| Filter Frame | Aluminum/Galvanized/Plastic |
| Temperature Resistance | 80°C |
| Max. Temperature | 100°C |
| Relative Humidity | 100% |
| Rec. Final Pressure Drop | 400 - 450 Pa. |
Replacement Cycle:
- Under the rated air volume, it needs to be replaced in 3 - 6 months.
- Resistance of 450Pa or more must be replaced.
- If it is washable filter material, it can be washed with clean water or neutral detergent solution to dry and then used, washed up to two times, and then replaced.
- The dust concentration in the environment is large, and the service life will be shortened.
It is primarily used for intermediate filtration in an air conditioning system, usually located just before the HEPA filter. It effectively filters sub-micron dust particles to protect subsequent filters and the overall system.
Synthetic filters are manufactured from high-performance non-woven fabric using a thermal melting process. This avoids the shedding of particles and the human discomfort typically associated with old-fashioned glass fiber materials.
Yes, if the filter material is explicitly designated as washable. You can clean it using clean water or a neutral detergent solution, let it dry, and reuse it. It is recommended to wash it a maximum of two times before complete replacement.
The uniform appearance color corresponds to specific filtration efficiency ratings (such as M5, M6, F7, F8, F9). This color-coding system makes it incredibly easy to identify the correct filter class during maintenance.
These synthetic pocket filters generally have a continuous temperature resistance of 80°C and can withstand a maximum peak temperature of up to 100°C.
If the dust concentration in your operating environment is unusually high, the filter will reach its final pressure drop (450Pa or more) much faster, significantly shortening its expected service life.